Geekvape B60 (Aegis Boost 2) Pod Mod Kit is the new boost with new tri-proof, Stunningly leakproof design. Intelligent working modes by AS-Chip. A fresher look with 0.96-inch LED curved display. A safer carry with A-lock.
Parameters:
Output Power: 5W-60W
Maximum Output Current: 20A
Maximum Output Voltage: 7.5V
Power Display: Battery icon on the screen
Charging Port: Type-C Port
Resistance Range of Cartridge: 0.2 ohm - 2 ohm
Battery Specification: Built-in 2000mAh battery
Display Screen: 0.96 inch, TFT color screen
Operating Temperature: 0°C~45°C
Storage T emperature:-20°C~60°C
Relative Humidity: 10%RH70%RH
Cooling Mode: Natural cooling
Features:
Top Airflow Leakproof Design
Powered By AS Chip
IP68 Rating
0.96" LED Curved Display
Brand-new UI
2000mAh Built-in Battery
A-Lock
Package includes:
1x Mod
1x Pod (5ml)
1x Coil Tool
1x USB Cable(Type-C)
2x Geekvape B Series Coil (Pre-installed: 0.2Ω 50-58W,Spare Coil: 0.6Ω 15-25W)
Key Features
Geekvape B60 pod mod comes with higher output power at 60W, in contrast with the previous 40W. It runs on a 2000mAh built-in battery, which might hold up around two days based on our rough guesstimate. Tank capacity is elevated as well. Aegis Boost 2’s tank can hold 5ml e-juice, 1.5ml more than the original Aegis Boost 1.
The new launch also puts lots of focuses on enhancing its ease of use. Geekvape B60 uses a toggle slide for airflow adjustment, which doubtlessly allows for simpler and more accurate control than the spinning wheel of first generation. And it replaces the previous buckle with magnets to connect its tank and mod section. Geekvape B60 retains the top fill mechanism, while fixing the leaking issues to make sure truly hassle-free refills.
According to Geekvape, they scale down the B60 pod mod, but improve the device’s durability with all-new tri-proof tech. It’s smaller, lighter, and meanwhile sturdier; for sure this one will fit better with everyday vaping, more capable of handling rough-ups and easier to be carried around.
Its chipset also takes a step forward. So with this Geekvape B60 pod mod, you’ll have access to two new foolproof modes, Smart and Boosting, to put out at an optimum power level even though you’re none the wiser about resistance theories. The former ensures you vaping within the recommended wattage range all the time, whereas the latter can get your device ramping up to the acceptable highest power in one click. Both are nice updates for vape newbies. Also, this B60 pod mod adds a safety lock to prevent accidental firing.