SMOK Nfix Pro Pod System Kit 700mAh 25W

The Smok NFix Pro is the newest NFix pod release from Smok.

Previous NFix devices have included the NFix Pod Kit and the NFix Mate.

The NFix range sits in the category of easy-to-use pods systems that offer a little more than just the basics.

So what does the NFix Pro Kit offer?
It comes with a built-in 700mAh battery that can be charged via USB Type-C with a 0.7A charge rate. Smok states it can completely charge within 70 minutes.
The NFix Pro has an adjustable power range between 5-25W, which can be adjusted using the button beneath the screen.
Smok NFix Pro
It comes with a 0.69″ OLED display that will show your settings (Wattage, Coil Resistance, Puff count) and battery status.

The NFix Pro also comes with an adjustable airflow switch on the back of the device so you can tailor the draw to your preference.

The device is draw-activated; there is no designated fire button.

The pod for the NFix Pro has a 2ml capacity and can be filled via the side fill port. The pods use replaceable coils, which are the LP1 coil range, which includes the following:

0.9Ω LP1 coil Meshed (included)
1.2Ω LP1 coil Meshed (included)
0.8Ω LP1 coil Meshed
0.8Ω DC LP1 coil (Dual Wire)
It comes with two coils in the kit, the 0.9Ω and 1.2Ω LP1 Meshed coil.

Physical Parameter:
Size: 22×13.2×110.4mm
Output: 5-25W (2-4V) VW
Battery: 700mAh (internal)
Display: 0.69in OLED Screen and LED indicator
Resistance range: 0.6-3Ω
E-liquid capacity: 2ml
USB Type C – 0.7A charge rate (70 min charge time)
Pods: Replaceable coils
Pods: LP1 coils – 0.9Ω, 1.2Ω, 0.8Ω, 0.8Ω DC
Adjustable airflow
Draw activated
Side fill port

Packing list:
1 x SMOK Nfix Pro Device(700mAh)
1 x SMOK Nfix Pro Pod (LP1 Meshed 0.9ohm MTL Coil Pre-installed) (2ml)
1 x SMOK LP1 Meshed 1.2ohm MTL Coil
1 x Type-C Cable
1 x User Manual